您当前的位置:检测资讯 > 法规标准

美国重新发布关于复合木制品甲醛排放参考标准和测试标准的要求

嘉峪检测网        2018-02-27 14:51

2018年2月8日,美国环保署发布一项最终法则,以更新复合木制品甲醛参考标准和测试标准,此法规自发布起立即生效,重点如下:

1.法则的700.3节修订 “硬质纤维板” 、 “硬木胶合板” 、 “中密度纤维板”, “刨花板” 和 “质量控制限值” 定义;

2.法则的700.3节将 “EPA TSCA Title VI Product Accreditation Body or EPA TSCA Title VI Product AB” 和 “"TPC laboratory” 需要符合ISO/IEC 17020:1998(E)的标准更新为ISO/IEC:2012(E);

3.40 CFR 770提到下列标准需更新版本号:

2016年12月12发布的标准版本号 此法规更新的标准版本号
ANSI/AITC A190.1–2002 American National Standard for Structural Glued Laminated Timber ANSI A190.1–2017 Standard for Wood Products - Structural Glued Laminated Timber.
ANSI A208.1–2009 American National Standard for Particleboard. ANSI A208.1–2016 American National Standard for Particleboard.
ANSI A208.2–2009 American National Standard for Medium Density Fiberboard for Interior Applications. ANSI A208.2–2016 American National Standard for Medium Density Fiberboard for Interior Applications.
ANSI–HPVA HP–1–2009 American National Standard for Hardwood and Decorative Plywood. ANSI–HPVA HP–1–2016 American National Standard for Hardwood and Decorative Plywood.
ASTM D5055–05 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists. ASTM D5055–16 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists.
ASTM D5456–06 Standard Specification for Evaluation of Structural Composite Lumber Products. ASTM D5456–14b Standard Specification for Evaluation of Structural Composite Lumber Products.
ASTM D5582–00 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator. ASTM D5582–14 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator.
ASTM D6007–02 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber. ASTM D6007–14 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber.
ASTM E1333–10 Standard Test Method for Determining Formaldehyde Concentration in Air and Emission Rates from Wood Products Using a Large Chamber. ASTM E1333–14 Standard Test Method for Determining Formaldehyde Concentration in Air and Emission Rates from Wood Products Using a Large Chamber.
BS EN 717–2: 1995 Wood-based panels—Determination of formaldehyde release—Part 2: Formaldehyde release by the gas analysis method. BS EN ISO 12460–3:2015 Wood-based panels—Determination of formaldehyde release. Part 3: Gas analysis method.
BS EN 120: 1992 Wood-based panels. Determination of formaldehyde content—Extraction method called the perforator method. BS EN ISO 12460–5:2015 Wood-based panels—Determination of formaldehyde release. Part 5: Extraction method (called the perforator method).
JIS A1460:2001(E) Building boards-determination of formaldehyde emission—Desiccator method. JIS A1460:2015 Determination of the emission of formaldehyde from building boards—Desiccator method.
PS–1–07 Structural Plywood PS–1–09 Structural Plywood.
PS–2–04 Performance Standard for Wood-Based Structural- Use Panels. PS–2–10 Performance Standard for Wood-Based Structural-Use Panels.

分享到:

来源:INTERTEK