您当前的位置:检测资讯 > 法规标准

FCC认证标签要求

嘉峪检测网        2018-08-31 22:21

标签要求

●  Lable尺寸大小不作要求,清晰可见即可

●  Lable内容雕刻、印刷产品外观上

●  位置应为:  在一永久平面上,  不可拆卸部件上(例如: 电池盖、拐角处)

 

标签要求Label Requirement——SDoC

❶ Identification of the product, e.g., trade name, model, etc.产品标识: 商标、型号

❷  A statement that the product complies with the rules, as applicable #1;  产品适用的符合性声明

❸ The name and address, and telephone number, or internet contact information of the responsible party’s contact located in the United States.在美国可联系到的代理信息: 公司名、地址、电话、或网址

Devices authorized under the SDoC procedure have the option to use the FCC logo to indicate compliance with the FCC rules 产品符合了 SDoC 认证流程, 则可以 FCC logo. 

【华通威解析】

●  The compliance information must be provided in a form that an end-user can reasonably be expected to have the capability to access: the instruction manual, a separate product insert, computer disk, web page, or the device’s own electronic screen.可以通过以下方式体现: 说明书、插页、光碟、 网页、产品的显示屏

●  建议标签体现以下信息: FCC logo, Trade name, model

 

标签要求Label Requirement ——SDoC Certification

 

❶ The product shall bear a nameplate or label with the FCC Identifier (FCC ID), The FCC ID must always be accessible when using the product.产品必须要有 FCC ID

❷ The placement of the FCC ID must be a physical label on the product, unless an e-label is used.体现 FCC ID 必须是物理标签 (除非使用了电子标签)

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

❶ This device may not cause harmful interference, and

❷ This device must accept any interference received, including interference that may cause undesired operation

【华通威解析】

●  When the device is so small, or for such use that it is impracticable to label with a font size that is four-points or larger, then the FCC ID shall be placed in the user manual, and the FCC ID shall also be placed either on the device packaging or on a removable label attached to the device.如产品尺寸太小(不能放置 4 号字体), 则 FCC ID 可放置在说明书、包装盒、移动标签上.

●  建议标签体现以下信息: FCC ID, Trade name, model

 

标签要求Label Requirement ——SDoC#1

Products authorized under Part 15 using SDoC or Certification require a label containing one of the following compliance statements

❶ Receivers associated with licensed radio service operations:

This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

❷ Stand-alone cable input selector switch:

This device complies with part 15 of the FCC Rules for use with cable television service.

❸ All other devices:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

① This device may not cause harmful interference, and

② This device must accept any interference received, including interference that may cause undesired operation

 

 

Products authorized under SDoC and Part 18 required to include a compliance statement similar to the following:

“This device complies with Part 18 of the FCC Rules.”

 

标签要求Label Requirement ——SDoC#1 Certification

 

A host product shall use a physical label stating “Contains Transmitter Module FCC ID: XYZMODEL1,” or “Contains FCC IDs: XYZMODEL1, XYZMODEL2,” or shall use e-labeling

分享到:

来源:深圳华通威国际检验