您当前的位置：检测资讯 > 法规标准
嘉峪检测网 2015-04-04 23:17
2014年5月16日，欧盟发布官方公告2014/C 149/03，更新了关于原低电压指令（2006/95/EC）的协调标准清单。
与协调标准同时公布的还有DoC，全称为“被替代标准的符合推断性中止期” （Date of cessation of presumption of conformity of superseded standard），DoC相当于新标准的实施日期。对于某一新版标准，超过DoC，被替代标准及其所有增补件在安全方面不再胜任技术进步和良好工程规范的要求，从而不再具有推断符合性；对于某一标准的增补件，超过其对应的DoC，被修订的标准必须与此增补件一同使用才具有推断符合性。
此次公布的LVD指令最新协调标准清单中，2013年出版的新标准或增补件列于下表。其中与我省重点出口产品相关的主要更新标准有：
1、电线电缆：EN 50117“同轴电缆”（Coaxial cables）、EN 50288“用于模拟和数字通信及控制的多元件金属电缆”（Multi-element metallic cables used in analogue and digital communication and control）系列标准
2、家用电器：EN 60335“家用和类似用途电气设备的安全性”（Safety of household and similar electrical appliances）系列标准
3、照明设备：EN 60598“灯具”（Luminaires）系列标准
|
标准化组织 |
协调标准号 |
标准名称 |
Doc |
|
CEN |
|
Lasers and laser-related equipment — Laser device — Minimum requirements for documentation(ISO 11252:2013) |
|
|
EN 50085-1:2005/A1:2013 |
Cable trunking systems and cable ducting systems for electrical installations — Part 1: General requirements |
2016-05-20 |
|
|
Cenelec |
EN 50085-2-1:2006/A1:2011 |
Cable trunking systems and cable ducting systems for electrical installations — Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
2014-10-10 |
|
Cenelec |
EN 50117-1:2002/A2:2013 |
Coaxial cables — Part 1: Generic specification |
2016-06-17 |
|
Cenelec |
EN 50117-2-1:2005/A2:2013 |
Coaxial cables — Part 2-1: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz - 1 000 MHz |
2016-07-01 |
|
Cenelec |
EN 50117-2-2:2004/A2:2013 |
Coaxial cables — Part 2-2: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -1 000 MHz |
2016-07-01 |
|
Cenelec |
EN 50117-2-3:2004/A2:2013 |
Coaxial cables — Part 2-3: Sectional specification for cables used in cabled distribution networks — Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz |
2016-07-01 |
|
Cenelec |
EN 50117-2-4:2004/A2:2013 |
Coaxial cables — Part 2-4: Sectional specification for cables used in cabled distribution networks — Indoor drop cables for systems operating at 5 MHz -3 000 MHz |
2016-07-01 |
|
Cenelec |
EN 50117-2-5:2004/A2:2013 |
Coaxial cables — Part 2-5: Sectional specification for cables used in cabled distribution networks — Outdoor drop cables for systems operating at 5 MHz -3 000 MHz |
2016-07-01 |
|
Cenelec |
EN 50117-4-1:2008/A1:2013 |
Coaxial cables — Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 — Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
2016-06-17 |
|
Cenelec |
EN 50288-1:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 1: Generic specification |
2016-03-18 |
|
Cenelec |
EN 50288-2-1:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 2-1: Sectional specification for screened cables characterised up to 100 MHz — Horizontal and building backbone cables |
2016-03-18 |
|
Cenelec |
EN 50288-2-2:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 2-2: Sectional specification for screened cables characterised up to 100 MHz — Work area and patch cord cables |
2016-03-18 |
|
Cenelec |
EN 50288-3-1:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz — Horizontal and building backbone cables |
2016-03-18 |
|
Cenelec |
EN 50288-3-2:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz — Work area and patch cord cables |
2016-03-18 |
|
Cenelec |
EN 50288-4-1:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 4-1: Sectional specification for screened cables characterised up to 600 MHz — Horizontal and building backbone cables |
2016-03-18 |
|
Cenelec |
EN 50288-4-2:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 4-2: Sectional specification for screened cables characterised up to 600 MHz — Work area and patch cord cables |
2016-03-18 |
|
Cenelec |
EN 50288-5-1:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 5-1: Sectional specification for screened cables characterized up to 250 MHz — Horizontal and building backbone cables |
2016-03-18 |
|
Cenelec |
EN 50288-5-2:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 5-2: Sectional specification for screened cables characterized up to 250 MHz — Work area and patch cord cables |
2016-03-18 |
|
Cenelec |
EN 50288-6-1:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz — Horizontal and building backbone cables |
2016-03-18 |
|
Cenelec |
EN 50288-6-2:2013 |
Multi-element metallic cables used in analogue and digital communication and control — Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz — Work area and patch cord cables |
2016-03-18 |
|
Cenelec |
EN 50290-2-23:2013 |
Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
2016-09-16 |
|
Cenelec |
EN 50290-2-25:2013 |
Communication cables — Part 2-23: Common design rules and construction — Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
2016-09-16 |
|
Cenelec |
EN 60061-1:1993/A49:2013 |
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps |
2016-04-02 |
|
Cenelec |
EN 60061-2:1993/A46:2013
|
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 2: Lampholders |
2016-04-02 |
|
Cenelec |
EN 60061-3:1993/A47:2013
|
Lamp caps and holders together with gauges for the control of interchangeability and safety — Part 1: Lamp caps Part 3: Gauges |
2016-04-02 |
|
Cenelec |
EN 60127-4:2005/A2:2013 |
Miniature fuses — Part 4: Universal modular fuse-links (UMF) — Through-hole and surface mount types |
2016-01-11 |
|
Cenelec |
EN 60127-7:2013 |
Miniature fuses — Part 7: Miniature fuse-links for special applications |
|
|
Cenelec |
EN 60143-2:2013 |
Series capacitors for power systems — Part 2: Protective equipment for series capacitor banks |
2016-01-15 |
|
Cenelec |
EN 60252-1:2011/A1:2013 |
AC motor capacitors — Part 1: General — Performance, testing and rating — Safety requirements — Guidance for installation and operation |
2016-10-03 |
|
Cenelec |
EN 60252-2:2011/A1:2013 |
AC motor capacitors — Part 2: Motor start capacitors |
2016-10-03 |
|
Cenelec |
EN 60335-2-2:2010/A1:2013 |
Household and similar electrical appliances — Safety — Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
2015-12-20 |
|
Cenelec |
EN 60335-2-6:2003/A13:2013 |
Household and similar electrical appliances — Safety — Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
2015-11-20 |
|
Cenelec |
EN 60335-2-7:2010/A1:2013 |
Household and similar electrical appliances — Safety — Part 2-7: Particular requirements for washing machines |
2015-11-20 |
|
Cenelec |
EN 60335-2-17:2013 |
Household and similar electrical appliances — Safety — Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
2015-04-30 |
|
Cenelec |
Household and similar electrical appliances — Safety — Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation |
2014-11-21 |
|
|
Cenelec |
EN 60335-2-34:2013 |
Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors |
2015-06-27 |
|
Cenelec |
EN 60432-3:2013 |
Incandescent lamps — Safety specifications — Part 3: Tungsten-halogen lamps (non-vehicle) |
2015-08-08 |
|
Cenelec |
EN 60519-4:2013 |
Safety in electroheating installations — Part 4: Particular requirements for arc furnace installations |
2016-07-24 |
|
Cenelec |
EN 60519-10:2013 |
Safety in electroheating installations — Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications |
2016-03-29 |
|
Cenelec |
EN 60519-12:2013 |
Safety in electroheating installations — Part 12: Particular requirements for infrared electroheating installations |
|
|
Cenelec |
EN 60529:1991/A2:2013 |
Degrees of protection provided by enclosures (IP Code) |
2016-10-03 |
|
Cenelec |
EN 60598-2-8:2013 |
Luminaires — Part 2-8: Particular requirements — Handlamps |
2016-06-03 |
|
Cenelec |
EN 60598-2-11:2013 |
Luminaires — Part 2-11: Particular requirements — Aquarium luminaires |
2016-06-20 |
|
Cenelec |
EN 60598-2-12:2013 |
Luminaires — Part 2-12: Particular requirements — Mains socket-outlet mounted nightlights |
2016-06-03 |
|
Cenelec |
EN 60598-2-24:2013 |
Luminaires — Part 2-24: Particular requirements — Luminaires with limited surface temperatures |
2016-07-24 |
|
EN 60670-1:2005/A1:2013 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 1: General requirements |
2017-12-31 |
|
|
Cenelec |
EN 60670-24:2013 |
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations — Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment |
|
|
Cenelec |
EN 60688:2013 |
Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
|
|
Cenelec |
EN 60695-2-10:2013 |
Fire hazard testing — Part 2-10: Glowing/hot-wire based test methods — Glow-wire apparatus and common test procedure |
|
|
Cenelec |
EN 60695-11-10:2013 |
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods |
2016-06-25 |
|
Cenelec |
EN 60934:2001/A2:2013 |
Circuit-breakers for equipment (CBE) |
2016-02-22 |
|
Cenelec |
EN 60947-2:2006/A2:2013 |
Low-voltage switchgear and controlgear — Part 2: Circuit-breakers |
2016-03-07 |
|
Cenelec |
EN 60947-5-5:1997/A11:2013 |
Low-voltage switchgear and controlgear — Part 5-5: Control circuit devices and switching elements — Electrical emergency stop device with mechanical latching function |
2015-12-03 |
|
Cenelec |
EN 60950-1:2006/A2:2013 |
Information technology equipment — Safety — Part 1: General requirements |
2016-07-02 |
|
Cenelec |
EN 60968:2013 |
Self-ballasted lamps for general lighting services — Safety requirements |
2015-10-31 |
|
Cenelec |
EN 60974-2:2013 |
Arc welding equipment — Part 2: Liquid cooling systems |
2016-02-28 |
|
Cenelec |
EN 60974-5:2013 |
Arc welding equipment — Part 5: Wire feeders |
2016-06-27 |
|
Cenelec |
EN 60974-7:2013 |
Arc welding equipment — Part 7: Torches |
2016-02-28 |
|
Cenelec |
EN 61010-2-201:2013 |
Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-201: Particular requirements for control equipment |
2016-04-01 |
|
Cenelec |
EN 61034-2:2005/A1:2013 |
Measurement of smoke density of cables burning under defined conditions — Part 2: Test procedure and requirements |
2016-05-26 |
|
Cenelec |
EN 61195:1999/A1:2013 |
Double-capped fluorescent lamps — Safety specifications |
2015-11-16 |
|
Cenelec |
EN 61199:2011/A1:2013 |
Single-capped fluorescent lamps — Safety specifications |
2015-11-01 |
|
Cenelec |
EN 61347-1:2008/A2:2013 |
Lamp controlgear — Part 1: General and safety requirements |
2016-01-01 |
|
Cenelec |
EN 61347-2-9:2013 |
Lamp controlgear — Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
2015-12-04 |
|
Cenelec |
EN 61439-4:2013 |
Low-voltage switchgear and controlgear assemblies — Part 4: Particular requirements for assemblies for construction sites (ACS) |
2015-12-20 |
|
Cenelec |
EN 61535:2009/A1:2013 |
Installation couplers intended for permanent connection in fixed installations |
2015-06-20 |
|
Cenelec |
EN 61557-10:2013 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures — Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures |
2016-06-03 |
|
Cenelec |
EN 61557-14:2013 |
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. — Equipment for testing, measuring or monitoring of protective measures —Part 14: Equipment for testing the safety of electrical equipment of machinery |
|
|
Cenelec |
EN 61558-2-14:2013 |
Safety of transformers, reactors, power supply units and combination thereof — Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers |
|
|
Cenelec |
EN 61558-2-16:2009/A1:2013 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units |
2016-09-16 |
|
Cenelec |
EN 61558-2-26:2013 |
Safety of transformers, reactors, power supply units and combinations thereof — Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
|
|
Cenelec |
EN 61643-21:2001/A2:2013 |
Low voltage surge protective devices — Part 21: Surge protective devices connected to telecommunications and signalling networks — Performance requirements and testing methods |
2015-08-31 |
|
Cenelec |
EN 61730-1:2007/A2:2013 |
Photovoltaic (PV) module safety qualification — Part 1: Requirements for construction |
2016-04-18 |
|
Cenelec |
EN 62026-2:2013 |
Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 2: Actuator sensor interface (AS-i) |
|
|
Cenelec |
EN 62026-7:2013 |
Low-voltage switchgear and controlgear — Controller-device interfaces (CDIs) — Part 7: CompoNet |
|
|
Cenelec |
EN 62031:2008/A1:2013 |
LED modules for general lighting — Safety specifications |
2015-12-03 |
|
Cenelec |
EN 62040-1:2008/A1:2013 |
Uninterruptible power systems (UPS) — Part 1: General and safety requirements for UPS |
2016-02-14 |
|
Cenelec |
EN 62196-1:2012/A11:2013 |
Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 1: General requirements |
2017-10-15 |
|
Cenelec |
EN 62196-2:2012/A11:2013 |
Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles —Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
2017-10-15 |
|
Cenelec |
EN 62395-1:2013 |
Electrical resistance trace heating systems for industrial and commercial applications — Part 1: General and testing requirements |
2016-10-14 |
|
Cenelec |
EN 62444:2013 |
Cable glands for electrical installations |
2016-09-23 |
|
Cenelec |
EN 62606:2013 |
General requirements for arc fault detection devices |
|
|
Cenelec |
HD 60269-2:2013 |
Low-voltage fuses — Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) — Examples of standardized systems of fuses A to K |
2016-08-15 |
|
Cenelec |
HD 60269-3:2010/A1:2013 |
Low-voltage fuses — Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) — Examples of standardized systems of fuses A to F |
2016-03-05 |
来源：嘉峪检测网
