您当前的位置:检测资讯 > 其他

(EU) No 1230/2014:批准copper bilysinate作为饲料添加剂用于所有动物种类(concerning the authorisation of copper bilysinate as a feed additive for all animal species)

嘉峪检测网        2015-09-05 15:14

【发布单位】 EUROPEAN COMMISSION
【发布文号】 (EU) No 1230/2014
【发布日期】 2014-11-18
【生效日期】
【废止日期】
【替代法规】
【效  力】
【食品伙伴网解读】

20141118,欧盟发布委员会实施条例(EU) No 1230/2014批准copper bilysinate作为饲料添加剂。copper bilysinate属于营养型添加剂分类微量元素混合物功能组作为添加剂用动物营养。本法规的附件对此添加剂的编号、授权持有人名称、组成成分、化学结构式及分析方法适用动物种类、最大使用量授权终止日期等进行了规定。


  COMMISSION IMPLEMENTING REGULATION (EU) No 1230/2014

  of 17 November 2014

  concerning the authorisation of copper bilysinate as a feed additive for all animal species

  (Text with EEA relevance)

  THE EUROPEAN COMMISSION,

  Having regard to the Treaty on the Functioning of the European Union,

  Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition (1), and in particular Article 9(2) thereof,

  Whereas:

  (1)

  Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such authorisation.

  (2)

  In accordance with Article 7 of Regulation (EC) No 1831/2003, an application was submitted for the authorisation of copper bilysinate. That application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.

  (3)

  That application concerns the authorisation of copper bilysinate as a feed additive for all animal species, to be classified in the additive category ‘nutritional additives’.

  (4)

  The European Food Safety Authority (‘the Authority’) concluded in its opinion of 3 July 2014 (2) that, under the proposed conditions of use, copper bilysinate does not have an adverse effect on animal health, human health or the environment and that it may be considered as an efficacious source of copper for all animal species. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additive in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.

  (5)

  The assessment of copper bilysinate shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of that substance should be authorised as specified in the Annex to this Regulation.

  (6)

  The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,

  HAS ADOPTED THIS REGULATION:

  Article 1

  The substance specified in the Annex, belonging to the additive category ‘nutritional additives’ and to the functional group ‘compounds of trace elements’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.

  Article 2

  This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

  This Regulation shall be binding in its entirety and directly applicable in all Member States.

  Done at Brussels, 17 November 2014.

  For the Commission

  The President

  Jean-Claude JUNCKER
 

ANNEX

Identification number of the additive
Name of the holder of authorisation
Additive
Composition, chemical formula, description, analytical method
Species or category of animal
Maximum age
Minimum content
Maximum content
Other provisions
End of period of authorisation
Content of element (Cu) in mg/kg of complete feedingstuff with a moisture content of 12 %
Category of nutritional additives. Functional group: compounds of trace elements
3b411
Copper bilysinate
Characterisation of the additive
Powder or granulate with a content of copper ≥ 14,5 % and lysine ≥ 84,0 %.
Characterisation of the active substance
Copper chelate of L-lysinate-HCl
Chemical formula: Cu(C6H13N2O2)2 × 2HCl
CAS number: 53383-24-7
Analytical methods (1):
For the quantification of Lysine content in the feed additive:
Ion-exchange chromatography combined with post-column derivatisation and colorimetric or fluorescence detection — EN ISO 17180.
For the quantification of total copper content in the feed additive and premixtures:
Inductively coupled plasma atomic emission spectrometry (ICP-AES) — EN 15510,
or
Inductively coupled plasma atomic emission spectrometry after pressure digestion, (ICP-AES) — EN 15621.
For the quantification of total copper in the feed materials and compound feed:
Atomic absorption spectrometry (AAS) — Commission Regulation (EC) No 152/2009, or
Inductively coupled plasma atomic emission spectrometry (ICP-AES) — EN 15510, or
Inductively coupled plasma atomic emission spectrometry after pressure digestion (ICP-AES) — EN 15621.
All animal species
Bovines:
bovines before the start of rumination: 15 (total),
other bovines: 35 (total).
Ovines: 15 (total).
Piglets up to 12 weeks: 170 (total).
Crustaceans: 50 (total).
Other animals: 25 (total).
1.
The additive shall be incorporated into feed in the form of a premixture.
2.
For user safety: breathing protection, safety glasses and gloves should be worn during handling.
3.
The following words shall be included in the labelling:
For feed for sheep if the level of copper in the feed exceeds 10 mg/kg:
‘The level of copper in this feed may cause poisoning in certain breeds of sheep.’
For feed for bovines after the start of rumination if the level of copper in the feed is less than 20 mg/kg:
‘The level of copper in this feed may cause copper deficiencies in cattle grazing pastures with high contents of molybdenum or sulphur.’
‘The lysine content of the additive should be considered when formulating feed.’
8 December 2024.

 

更多国外法规翻译,请联系食品翻译中心
编辑:fagui

分享到:

来源:EUROPE

相关新闻:

周点击排行 月点击排行

材料分析 石油化工

医疗器械 医药

电子电气 汽车材料